The Dodo Juice Fin Cut pad design not only runs cooler and slings less, it allows for a more consistent cut across the whole face of the pad. A great step up from the ever popular ‘waffle’ design.
This is an 80mm ‘spot pad’ for working smaller areas, in an aggressive Orange Fin foam for removing heavier defects. It suits rotary machines best and is not recommended for use with orbital ('DA') machines (like our Buff Daddy), where a Supernatural Mini Microfibre orbital cutting pad should be used instead. Ensure that this pad does not get too hot during use, or delamination could occur. Panel temps should always be 'touchable'. Aggressive foams are notorious for heat load, so swap to a Supernatural merino wool pad if you require heavy rotary cut without the same high panel temperatures.
Suits 65mm-80mm (2.5-3 inch) backing plates.
Please note that pads should always be stopped/started on the panel, removed gently from the backing plate and washed carefully with mild detergent (don't let it soak overnight) to prevent premature delamination of the hook and loop backing from the pad. Do not let heavy cut foam pads get too hot as they could delaminate. Panel temperatures should always be cool enough to touch.
To maintain, simply massage neat washing up liquid into the foam pad cutting face under a running tap, then rinse thoroughly and allow to air dry.
