Arc Angel DAS-15 Machine Polishing Bundle

• 15mm long throw for faster correction over large panels
• Comes with pads, backing plate, and carry bag
• 900W motor delivers serious correction power
• Designed for enthusiasts and professionals alike

• Arc Angel DAS-15 long throw 15mm orbital polisher (UK spec)
• Dodo Juice branded detailing bag
• Critical Finish 100ml ultra-fine cut polish
• Lime Prime 100ml fine cut polish
• Depth Charge 100ml heavier cut polish
• Peak Finish 150mm waffle foam finishing pad (low cut)
• Shark Fin 150mm fin-cut foam polishing pad (medium cut)
• Slim Reaper 135mm extra-slim compounding foam (heavier cut)
• Fibre Scyther 135mm microfibre medium/heavy cut pad (heavier cut, runs cooler than foam, potentially increasing the lifespan of your pads and even your machine itself during extended polishing sessions).

All the pads above are suitable for 120-125mm (5 inch) backing plates and have a traditional 'hook and loop' velcro backing. Note that you cannot use smaller 3 inch 'spot' pads with the Arc Angel.

Free machine polishing tutorials leaflet included with this kit - it takes you through the whole machine polishing process and you'll have the perfect pads and polishes to match.

Is it safe for beginners?
Machine polishing can easily be learned but it needs a cautious and educated technique - especially at the start. This machine can be used by beginners but they should have a good grounding in machine polishing techniques, or be willing to learn.

Will it remove deeper swirls?
Yes, you can remove deeper swirls and even light scratches that haven't gone through the clearcoat with the correct pad, polish and technique. However, it won't remove all defects, all the time - and you could even cause more damage to your paint attempting to correct ones that are too deep.

Can I use it on soft paint?
Yes, with gentle pads and polish. The longer throw can help prevent heat build up, but it does mean more care could be needed close to crease lines etc.

Does it get really hot in use?
Not when used with the correct pad and polish combination and machine polishing techniques, always keep it to moderate speed settings and adjust the process first rather than the power.

Will it work with 3” pads?
No, the shroud means it can only work with larger 125mm backing plates. Get the Buff Daddy Evo if you want a machine that works well with smaller 3" pads.

Does it vibrate a lot?
No, this is a balanced machine so whilst it will still vibrate due to its orbital nature, it will not vibrate too heavily and will be pleasant to use. However, we do not recommended it is used for extended periods of time, especially if you have circulatory issues.

Can you strike through or burn paint with this machine?
Any machine can endanger paint but if the correct techniques, pads and polishes are used, your paint will be safe. This is a clutched orbital machine so safer than a direct drive rotary. Heat build up on the panel is spread out rather than focussed.

What is the warranty?
We provide a 2 year warranty with this machine, subject to normal usage and excluding wear and tear.

Can I buy further motor brushes and other spares like backing plates from you?
No, currently we cannot provide additional motor brushes but there is a spare set in with each machine, which would mean many years of amateur use. Backing plates will not delaminate or need replacing with normal use but spares can often be found on third party sites as it is just a sander backing plate.