Supernatural Heavy Polishing Pad - fin cut foam cutting pad, 80mm (3 inch) - OFFER
Fin Cut pads can run cooler, sling less, and allow for a more consistent cut across the whole face of the pad.
This is an 80mm heavy polishing 'spot' pad for working smaller areas, made from a firm, dense foam for increased cut on medium and hard paints. It suits rotary polishers best (users of orbital machines should opt for the Supernatural Mini Microfibre pad instead).
Ensure that this pad does not get too hot during use, or delamination could occur. Panel temps should always be 'touchable'. Aggressive foams are notorious for heat load, so swap to a Supernatural merino wool pad if you require heavy rotary cut without the same high panel temperatures.
Suits 65mm-80mm (2.5-3 inch) backing plates.
Please note that pads should always be stopped/started on the panel, removed gently from the backing plate and washed carefully with mild detergent (don't let it soak overnight) to prevent premature delamination of the hook and loop backing from the pad.
To maintain, simply massage neat washing up liquid into the foam pad cutting face under a running tap, then rinse thoroughly and allow to air dry.